>>>> Click to watch video <<<<
|
|
sample 1 |
sample 2 |
Function description:
1. The mold is fixed by an automatic chuck and clamp, which is easy to replace. The mold is replaced with an overhead crane hoist to facilitate the operation.
2. The host adopts the motor to control the automatic swing angle, which saves the operation of moving the glue rack and the upper paper rack when replacing the mold in the traditional way.
3. The forming transmission part is controlled by a servo motor with a precise rotating structure, which has a good forming effect, high efficiency and low failure.
4, using Mitsubishi inverter, Mitsubishi servo motor, Mitsubishi touch screen, Mitsubishi PLC man-machine interface. Simple operation and easy to learn.
5. The production operation is fully digitalized, and the production specifications are input into the touch screen in batches, the production quantity is monitored, and the machine is automatically shut down after completion.
6, automatic alarm, fault prompt, easy maintenance
The main technical parameters:
Forming paper tube |
Quartet, oval |
Maximum paper tube production speed |
0-10 m / min |
Maximum margin of paper tube |
280MM |
Minimum opposite margin of paper tube |
30MM |
Paper layers |
13 Floor |
Paper tube thickness |
2-10mm |
Pipe cutting mode |
Chainsaw tablets |
Forming puck |
2 group |
Host swing angle |
Have |
Glue rack |
13Floor |
Glue way |
Double-sided gluing |
Operator |
2-3people |
Host speed |
Variable speed |
Input voltage |
380V |
|
|
Electrical control configuration
Monitor rate |
15KW |
Inverter |
Mitsubishi |
PLC controller |
Mitsubishi |
Touch screen |
Mitsubishi |
Servo motor |
Mitsubishi |