>>>> Click to watch video <<<<
|
|
Hydraulic multi-tool |
Pneumatic multi-tool |
Function description:
1. The mold is fixed with double positioning clips, which is easy to replace. Two heads and four heads are optional
2. Automatic / manual swing angle of the belt spindle box. The automatic swing angle of the host is controlled by the motor, and the swing angle can be switched by pressing the swing angle.
3. Ultra-quiet design of transmission part, precise transmission structure, high efficiency and low failure.
4. The main power adopts frequency conversion stepless speed regulation, and the cutter adopts servo synchronous tracking precision cutting.
5, using PLC control system, touch screen operation interface, human-machine interface is easy to learn and easy to operate. Automatic fault diagnosis and early warning feedback on the touch screen.
6. According to the needs of production, multiple batches of batch production can be set, and the machine will automatically stop after production.
The main technical parameters:
Max-diam production speed m / min |
0-15M |
Max-tube diameter mm |
Φ152mm |
Min tube diameter mm |
Φ20mm |
Paper layers / layer |
5-18 layer |
Paper tube thickness |
3-10mm |
Cutting way |
round cutting |
Belt winding heads |
2 or3 or 4 |
Winding head angle |
Manual |
Host swing angle |
Have |
Layers of glue stand |
18 layer |
Glue way |
Double sides |
Operators |
2--3 person |
Speed control |
Inverter |
Input voltage |
380V (3P) |
Monitor rate |
15.5/11KW |
Inverter |
Mitsubishi inverter |
PLC controller |
Mitsubishi PLC |
Touch screen |
Mitsubishi Touch screen |
Servo motor |
Mitsubishi Servo motor |