>>>> Click to watch video <<<<
|
|
Two head big machine |
TFour heads |
Function description:
1. The mold is fixed with double positioning clips, which is easy to replace. Two heads and four heads are optional
2. Automatic / manual swing angle of the headstock of the belt (4 heads). The automatic swing angle of the host computer can be controlled by the motor. The swing angle can be switched only by the swing angle. Trouble with paper holders.
3. Ultra-quiet design of transmission part, precise transmission structure, high efficiency and low failure.
4. The main power adopts frequency conversion stepless speed regulation, and the cutter adopts servo synchronous tracking precision cutting.
5, using PLC control system, touch screen operation interface, human-machine interface is easy to learn and easy to operate. Automatic fault diagnosis and early warning feedback on the touch screen.
6. According to the needs of production, multiple batches of batch production can be set, and the machine will automatically stop after production.
The main technical parameters:
Max-diam production speed m / min |
0-15M |
Max-tube diameter mm |
Φ450mm |
Min tube diameter mm |
Φ50mm |
Paper layers / layer |
5-30 layer |
Paper tube thickness |
3-15mm |
Cutting way |
Single round /saw cutting |
Belt winding heads |
2 or 4 |
Winding head angle |
Manual |
Host swing angle |
Have |
Layers of glue stand |
30 layer |
Glue way |
Double sides |
Operators |
3--4 person |
Speed control |
Inverter |
Input voltage |
380V (3P) |
Monitor rate |
37KW |
Inverter |
Mitsubishi inverter |
PLC controller |
Mitsubishi PLC |
Touch screen |
Mitsubishi Touch screen |
Servo motor |
Mitsubishi Servo motor |